Air Supply Unit, Assembly Overview

Air supply unit, assembly overview
Tightening torque for all air lines on the Audi A6 is 2 Nm (9 inch lbs,).





1. Clip
2. Air line
refer to Fig. 1 , See note
3. Connection piece
4. Hex nut M6
5. Sheet-metal screw
6. Sheet-metal piece
^ For centering valve unit
7. Rubber seal
8. Housing cover
9. Top foam piece
10. Valve unit
11. Air compressor
12. Gasket
^ Always replace
13. Bottom foam piece
14. Unit housing
15. Hex bolt, 10 Nm
^ When reinstalling use safeguard material D000 600 A2
16. Bonded fiber mat
^ Only A6 Avant
^ Preformed bonded fiber mat is glued onto bottom shell of unit
17. Air line
^ From compressor to solenoid valve, refer to Fig. 1 , See note