Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rear ABS Wheel Speed Sensor Rotor (FWD), Removing and Installing



ABS wheel speed sensor rotor (FWD), removing and installing

Special tools and equipment
^ 80-200 pry lever

Removing
- Remove wheel bolts.
- Raise vehicle.
- Remove wheel.





^ Remove bolts -A- and use wire to support brake caliper housing to body.
- Remove retainer for ABS wheel speed sensor.
- Pry ABS wheel speed sensor from wheel bearing/hub unit using 80 200 pry lever.





- Remove socket-head bolts from wheel bearing/hub unit and remove wheel bearing/hub unit with backing plate.

Installing
If ABS wheel speed sensor rotor is damaged or dirty, replace rotor together with wheel bearing/hub unit.
- Install new wheel bearing/hub unit and backing plate to axle beam and tighten to 60 Nm.
- Insert brake disc.
- Mount brake caliper to axle beam and tighten to 95 Nm.
- Install ABS wheel speed sensor.
Note installation position.
- Insert retrainer for ABS wheel speed sensor.