Trim Panels (Avant)

Upper D-pillar Trim, Removing And Installing







1 - D-pillar trim

Removing
- Remove screw - 4 - from rear mount - 5 - for partition grill.
- Remove bolt - 3 - (1x).
- Unclip D-pillar trim - 1 -, working from the top downward.
- Lift D-pillar trim out of cargo area side trim.

Installing
- Insert D-pillar trim behind cargo area side trim.
- Insert clips - 6 - on trim - 1 - into mounts.
- Clip trim - 1 - into place.
- Remainder of installation is carried out in reverse order of removal.






2 - Mount for cargo area cover
3 - Screw (1x)
- Tightening torque: 2.5 Nm (22 in lb)
4 - Screw (1x)
- Tightening torque: 5 Nm (44 in lb)
5 - Rear mount for partition grill
6 - Clip