Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing

Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing

Removing
- Remove driver side storage tray Body Interior -.







- Disconnect electrical connector - 2 -.
- Remove bolts - 1 - and - 3 -.
- Remove accelerator pedal module.

Installing
Installation is in reverse order of removal. Note the following:
- Install driver side storage tray Body Interior.

Vehicles with automatic transmission:
On vehicles with automatic transmission, the kick-down function must be adapted if the throttle position sensor or engine control module are replaced.

Torque specifications

Component Nm
Accelerator pedal 10
module to pedal mount