Seals For Power Take-Off, Replacing

Seals for power take-off, replacing





Special tools, testers and auxiliary items required
^ Pulling hook T20143
^ Thrust piece T40051
^ Thrust piece T40052

Work sequence
- Remove A/C compressor.
- Remove power steering pump.





- Pry out seal for A/C compressor drive using pulling hook T20143/1.





- Pry out seal for power steering pump drive using pulling hook T20143/1.





- Drive in seal for A/C compressor drive using thrust piece T40051.





- Drive in seal for power steering pump drive using thrust piece T40052.

The rest of the installation is performed in reverse order of removal. Note the following:
- Install power steering pump.
- Install A/C compressor.