Oil Pump and Lower Part of Sump, Overview

Oil pump and lower part of sump, overview





1. 10 Nm
2. Lower part of sump
^ With Oil level thermal sensor -G266-
3. 10 Nm
4. Intake connection
^ With oil strainer
5. Oil seal
^ Always replace
6. O-ring
^ Always replace
7. 10 Nm
8. Oil pipe
9. Oil seal
^ Always replace
10. 10 Nm
11. Oil pipe
12. O-rings
^ Always replace
13. Drive shaft
^ For coolant pump
14. Dowel sleeves
^ 2x 15 -Oil seal
^ Always replace
16. Oil pump
^ Do not disassemble
^ With relief valve approximately 4 bar
17. Drive shaft
^ For oil pump
18. 10 Nm
19. Housing for intake connection
20. O-ring
^ Always replace
21. Oil seal
^ Always replace
22. 10 Nm
23. Oil seal
^ Always replace
24. Oil drain plug, 50 Nm





Fig. 1 Removing and installing Oil level thermal sensor -G266-
1. Bolt, 10 Nm
^ Self-locking, replace
2. Oil seal
^ Replace
3. Connector
4. Oil Level Thermal Sensor -G266-