Rear Door Window Regulator Switch Panel, Removing and Installing

Window Regulator Switch Panel, Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1410
Removing
- Remove door trim.
- Remove insulation..
- Remove armrest.
- Remove bolts - 5 - (2x).
- Tightening torque 2 Nm
- Remove bolt - 4 -.
- Tightening torque 2 Nm
- Pull front section - 3 - of armrest - 1 - out of guide - 2 -.
- Push down cover - 6 - to rear.







- Disconnect connector on inside of front section - arrow -.
Installing
- Install window regulator switch module in reverse order of removal.