Headlight Washer Jets, Removing and Installing

Headlight Washer Jets, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.







- Move cover -1- of spray jet at bumper into "open" position.
- Pull out spray jet -2- upward by hand as far as it will go.







- Use small screwdriver to release clip -arrow- on side of jet.
- Lift jet insert out of cylinder.

Installing
Install in reverse order of removal, noting the following:







- Slide jet insert into cylinder until it engages.
- Heed installation position.
- Lugs -arrows- on jet insert must engage in recesses at cylinder