Procedures

Mirror Adjustment Switch, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Remove front door trim.
- Detach insulating mat from door trim.







- Remove screws -arrows- and detach armrest.







- Remove screw -arrow-.
- Detach switch mount -1- from armrest.







- Remove screws -arrows-.
- Detach switch mount with mirror adjustment switch.







- Disconnect electrical connector.-1- at switch -2-.
- Use small screwdriver to carefully release fasteners -arrows-.
- Pull mirror adjustment switch downward out of switch mount.

Installing
Install in reverse order of removal, noting the following:

NOTE: On installation, make sure symbol panel is inserted in front of mirror adjustment switch.

- Press switch into switch mount until fasteners engage.