Head Restraint Adjustment Motor With Active Head Restraint Module, Removing and Installing

Head Restraint Adjustment Motor With Active Head Restraint Module, Removing And Installing







1 - Head restraint adjustment motor with active head restraint module
- Remove seat.
- Attach Fixture for seat repair VAS 6136 to Engine and transmission holder VAS 6095.
- Attach front seat to Fixture for seat repair VAS 6136.
- Remove upper backrest cover panel
- Remove lower backrest cover panel.
- Remove backrest padding.
- Use power drill to remove rivet - 3 - and spacer sleeve - 4 - on left and right.
- Disconnect connector and disconnect wiring at head restraint adjustment motor - 1 -.
- Remove motor for head restraint adjustment with active head restraint module - 1 - and shaft - 2 - downward.
2 - Shaft for active head restraint module
3 - Rivet
4 - Spacer sleeve