Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Rear Air Distributor and Rear Air Duct, Removing and Installing



Rear Air Distributor And Rear Air Duct, Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1783/







1 - Extension-type center console
2 - Bolts (4x), 2 Nm
3 - Center console air distributor
- Left Rear Warm/Cold Flap Air Outlet Motor V220 - 4 -
- R Right Rear Warm/Cold Flap Air Outlet Motor V221 - 5 -
- Left Rear Center Console Temperature Sensor G311 - 7 -
- Right Rear Center Console Temperature Sensor G312 - 6 -

Removing

NOTE Before disconnecting connectors, mark assignment to rear left/right vent warm/cold flap control motors and rear left/right center console temperature sensors.

- Remove center console extension.
- Remove extension-type center console.
- Remove bolts - 8 - and - 9 - (4x).
- Pull rear left - 10 - and rear right - 11 - air ducts out of center console air distributor - 3 -
- Disconnect connectors at Left Rear Warm/Cold Flap Air Outlet Motor V220 - 4 - and Right Rear Warm/Cold Flap Air Outlet Motor V221 - 5 -.
- Disconnect connectors at Left Rear Center Console Temperature Sensor G311 - 7 - and Right Rear Center Console Temperature Sensor G312 - 6 - center console temperature sensors.
- Remove bolts - 2 - (4x).
- Remove center console air distributor - 3 -.

Installing
Install in reverse order of removal. Pay attention to the following:
- Pay attention to correct assignment when plugging in connectors at Left Rear Warm/Cold Flap Air Outlet Motor V220 - 4 - and Right Rear Warm/Cold Flap Air Outlet Motor V221 - 5 -.
- Pay attention to correct assignment when plugging in connectors at Left Rear Center Console Temperature Sensor G311 - 7 - and Right Rear Center Console Temperature Sensor G312 - 6 -.

4 - Left Rear Warm/Cold Flap Air Outlet Motor V220
5 - Right Rear Warm/Cold Flap Air Outlet Motor V221
6 - Right Rear Center Console Temperature Sensor G312
7 - Left Rear Center Console Temperature Sensor G311
8 - Bolts (2x), 2 Nm
9 - Bolts (2x), 2 Nm
10 - Rear left air duct

Removing
- Remove center console extension.
- Remove extension-type center console.
- Remove bolts - 8 - (2x).
- Pull rear left air duct out of center console air distributor - 3 -.

Installing
Install in reverse order of removal.

11 - Rear right air duct

Removing
- Remove center console extension.
- Remove extension-type center console.
- Remove bolts - 9 - (2x).
- Pull rear right air duct out of center console air distributor - 3 -.

Installing
Install in reverse order of removal.