Input Values For Replacing Instrument Cluster

Input values For replacing instrument cluster
The following must always be observed when replacing the instrument cluster:


NOTE:
- Instrument cluster must always be coded.
- Note the values indicated in measuring value blocks 10 to 15 before replacing!
- Note odometer reading or input value of odometer display (in miles) in measuring value block 10 (display field 4)
- In countries where speedometers are calibrated in miles, adaptation is performed in miles.
- In countries where speedometers are calibrated in kilometers, adaptation is performed in kilometers.

Perform the following steps after replacing instrument cluster:
- Code instrument cluster.
and
- Adaptation of consumption display (For changed fixed value).
- Language versions of driver information system.
- Adaptation of auxiliary heater.
- Adaptation of fuel gauge sender characteristic curve (For changed fixed value).
- Adaptation For distance driven since service.
- Adaptation For time since service.
- Enter adaptation For oil quality.
- Enter adaptation For maximum mileage performance.
- Enter adaptation For maximum time interval.
- Enter adaptation For powertrain CAN-bus.
- Enter adaptation For comfort system CAN-bus.
- Enter adaptation For powertrain CAN-bus.
and
- Enter mileage.
- Perform adaptation of immobilizer after replacing instrument.
- Adapt all vehicle keys.