Front Wheel Drive

Exhaust system components, overview (Front Wheel Drive vehicles)
1. Center muffler
2. 23 Nm
3. Support ring
4. 27 Nm
^ Always replace
6. Gasket
7. Oxygen sensor - 55 Nm
8. Oxygen sensor - 55 Nm
9. Exhaust manifold
10. Gasket
^ Always replace
11. 27 Nm
12. Oxygen sensor - 55 Nm
13. Front exhaust pipe with catalytic converter
14. Front clamping sleeve
15. 40 Nm
16. Oxygen sensor - 55 Nm
17. Front exhaust pipe with catalytic converter
18. Rear muffler
19. Support ring
^ Replace if damaged
20. 23 Nm
21. Rear muffler
^ For right side of vehicle
^ Factory-installed with center muffler as one unit. If repair is necessary, replace separately
^ Cutting point, Refer to Muffler, Service and Repair
^ Replacing end pipes, Refer to Exhaust System Components, Removing and Installing - Overview
^ Install exhaust system free of stress
22. 23 Nm
23. Rear clamping sleeve
^ Used when center or rear muffler is replaced separately.
^ Before tightening ensure exhaust system is free of stress
^ Installation position, Refer to Exhaust System Components, Removing and Installing - Overview, See Fig 2
^ Tighten bolts evenly
24. 40 Nm
25. Support ring
^ Replace if damaged
26. 23 Nm