Armrest, Assembly Overview

Armrest, Assembly Overview

Switches for window regulator, mirror adjustment and central locking, removing and installing







1 - Armrest
- Removal
- Remove door trim.
- Remove bolts -2- (11x).
- Remove armrest -1- to side.
2 - Bolt (11x)
- For vehicles with manual window crank:
- Remove manual window crank
3 - Window regulator switch
- For vehicles with electric window regulators:
- Remove window regulator switch
4 - Mirror adjustment switch
- Removal
- Press in tab on connector for mirror adjustment switch -4- and remove it.
- Remove mirror adjustment switch -4-using a screwdriver.
5 - Central locking switch
- Removal
- Press in tab on connector for central locking switch -5- and remove it.
- Pry out central locking switch -5- using a screwdriver.
- Raise door trim -1- upward approx. 20 cm. out from door shell.
- Disengage Bowden cable for interior door mechanism.
- Disconnect electrical harness connectors.
- Installing
When installing manual window crank, note its position.

Fig. 1 Disengaging Bowden cable







- Remove securing ring -3-.
- Pull Bowden cable -1- out of guide -2- and remove.

NOTE: When installing make sure that catch -3- faces upward.

Fig. 2 Harness connector to window regulator control module







- Press catch -2- and remove harness connector -3- from control module in direction of arrow.
- Disconnect harness connector to bass speaker.