Mounting Holes For Telephone Handset Bracket In Center Console, Fabricating

Mounting Holes For Telephone Handset Bracket In Center Console, Fabricating

When supplied as a spare part, center console has no mounting holes for telephone handset bracket. Mounting holes must be created.

- Remove center console.







- Fabricate mounting holes of the following dimensions:
a - 10 mm
b - 6 mm
c - 22 mm
d - 101 mm
e - 25 mm
f - 16 mm
g - 5 mm
h - 8 mm

- Engage threaded molding, Page in center console from rear and fasten bracket with a torque of 1.5 Nm.

NOTE: After installation check that glove compartment lid will open.