P0711

DTC 17095 / P0711

1) First check harness connector for corrosion and water ingress, replace if necessary. If there are malfunctions indicated, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) Transmission fluid temperature sensor -G93- is integrated in the wiring harness in the transmission (at valve body).
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.

Note: For DTC 17095 / P0711:
^ Requirement for malfunction recognition: The transmission oil temperature does not increase after starting engine or makes temperature leaps.