Bearing Housing, Torsen Differential and End Cover, Removing and Installing

Bearing housing, Torsen differential and end cover, removing and installing - 6 Spd. Manual Transmission 01E





1 - Bearing housing
2 - Bolt, 25 Nm

^ Qty. 6

3 - Dished spring

^ Installation position: larger diameter (concave side) faces shims
4 - Shim

^ Qty. 2 or 3
^ Re-determining shims

5 - Oil collector
6 - Multi-point socket head bolt, 150 Nm
7 - 2nd inner race for tapered roller bearing for input shaft
8 - Spring
9 - Torsen differential

^ Can be serviced only by manufacturer
^ Service bearings for Torsen differential

10 - Bolt, 25 Nm

^ Qty. 5

11 - End cover
12 - Gasket

^ Replace

13 - Dowel sleeve

^ Qty. 2

14 - Gear cluster
15 - Oil drain plug - 40 Nm
16 - Magnet

^ Qty. 2
^ Clean

17 - Support plate

^ Installation position: lugs face magnets

18 - Bolt, 25 Nm

^ Qty. 2