Bearing Housing, Torsen Differential End cover

Bearing housing, Torsen differential and end cover, removing and installing
1. Bearing housing
^ Disassembling and assembling, Refer to Bearing Housing, Disassembling and Assembling
2. Bolt, 25 Nm
^ Qty.6
3. Dished spring
^ Installation position: larger diameter (concave side) faces shims
4. Shim
^ Qty.2 or 3
^ Redetermining shims, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
5. Oil collector
^ Disassembling and assembling, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
^ Removing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
^ Installing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
6. Multi-point socket head bolt, 150 Nm
^ Removing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
^ Installing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
7. 2nd inner race for tapered roller bearing for input shaft
^ Removing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
^ Installing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and Installing (Assembly Sequence)
8. Spring
9. Torsen differential
^ Can be serviced only by manufacturer
^ Servicing bearings for Torsen differential, Refer to Bearings For Torsen Differential, Servicing
10. Bolt, 25 Nm
^ Qty. 5
11. End cover
^ Servicing, Refer to Bearings For Torsen Differential, Servicing
12. Gasket
^ Replace
13. Dowel sleeve
^ Qty.2
14. Gear cluster
^ Removing and installing, Refer to shift Lever, MT, Adjustments
15. Oil drain plug 40 Nm
16. Magnet
^ Qty. 2
^ Clean
17. Support plate
^ Installation position: lugs face magnets
18. Bolt, 25 Nm
^ Qty.2