Locking Cable For Tiptronic Shift Mechanism, Removing and Installing
Locking cable for Tiptronic shift mechanism, removing and installing - 5 Spd. Automatic Transmission 01V
Removing
- Shift selector lever into position "2".
- Note radio code (for vehicles equipped with coded anti-theft radio).
- Disconnect Ground (GND) strap from battery.
- Remove selector lever handle
- remove front center console
- Remove steering wheel.
- Switch ignition key to driving position (ignition on).
- Shift selector lever into position "P".
- Lift up retaining clip of interlock lever -1- and pull locking cable out of ignition/starter switch.
- Remove cover with guide (selector lever mechanism).
- Unclip locking cable from securing spring at shift mechanism housing, slightly lift up securing spring to do so.
- Loosen and remove locking cable from cable tie -2-.
Installing
- Route locking cable without kinking.
- Switch ignition key to driving position (ignition on).
- Insert locking cable into ignition/starter switch.
- Check locking mechanism of interior lever -1-.
- Secure locking cable to airbag sensor using cable tie -2-.
- Bring ignition/starter switch into locking position (ignition off).
- Shift selector lever into position "P".
- Clip locking cable into securing spring of shift mechanism housing.
- Hook locking cable bracket -3- into shift mechanism and locking coupling ring in lever (for locking cable).
Adjusting
- Shift selector lever into position "P".
- Loosen bolt -6-.
- It must be possible to slide bracket -3- in direction of arrow -5-.
- Adjust steering column downward.
- Connect 3352 A adjustment pin for shift lock 3 -item 4- between lever (for locking cable) and locking coupling ring.
- Pull locking cable in direction of arrow -5- and tighten bolt -6- to 10 Nm.
- Remove adjusting gauge.
- Check ignition key removal lock after every adjustment of the locking cable.
- Install steering wheel.
- Front center console, installing
- Install selector lever handle
- Connect battery Ground (GND) strap.
- For vehicles equipped with coded anti-theft radio, activate code.