Transmission, Attaching Assembly Stand

Transmission, attaching assembly stand - 5 Spd. A/T 01V Front and All Wheel Drive

Work procedure

^ Torque converter secured with Bracket 30-211 A or removed.

- Attach holding plate VW 309 onto attachment and holding rig 3457.





- Attach and secure Attachment and Holding Rig 3457 at mounts on transmission housing.

Note:
^ Attachment and Holding Rig 3457 should only be installed by hand in transmission.
^ If bolt is installed with pliers, transmission housing can be damaged.

- Insert transmission into Engine and Transmission Holder VAS 6095 using Shop Crane Load Cap=700-1200 kg VAS 6100.

Note:
^ Vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.