Tower "II", Disassembling

Tower "II", disassembling - 5 Spd. A/T 01V Front and All Wheel Drive





- If not carried out yet, remove adjustment shim - 2 - from clutch "B" - 1 -.





- Remove clutch "B" - 3 - and axial needle bearing - 2 - from clutch "A" - 1 -.





- Remove circlip - 2 - from input shaft - 1 -.





- Place clutch "A" - 1 - with outer edges on 2 wood blocks, approx. 40 mm high.
- Tap on input shaft - 2 - with clutch "E" using plastic hammer.
- Remove clutch "A" from clutch "E".