Clutch "C"

Clutch "C" - 5 Spd. A/T 01V Front and All Wheel Drive





1 - ATF pump with outer plate carrier "C"

^ Check inner splines for scoring from lining discs

5 - Plate spring

^ Replace in case of signs of wear or if dished washer tips are bent

6 - Split retaining ring

^ Replace if deformed

8 - Coated plates

^ Check for wear

9 - Outer plates

^ Check for wear





Check inner splines on ATF pump with outer disc carrier "C" for scoring from lining discs

- Check inner splines for signs of wear caused by coated plates.

^ Coated plates must not get caught in scoring - arrows -.

If scoring - arrows - caused by coated plates are greater than 0.5 mm:

- Replace outer plate carrier "C".





Checking coated and outer plates for wear

Signs of overheating on outer plates point to worn coated plates. Evaluate signs of wear as follows:

A - Spots of discoloration of outer plate caused by overheating in distance of more than 20 mm: Outer and coated plates OK, can be reused.
B - Spots of discoloration of outer plate caused by overheating in distance of less than 20 mm: Outer and coated plates worn, must be replaced.
C - Tarnish blue/brown at outer and/or inner area of outer plate: Outer and coated plates overheated and worn, must be replaced.