Code Control Module (Scan Tool Function 07)

Code Control Module (Scan Tool Function 07)

Using this function, the instrument cluster can be coded as follows:
- Options
- Country versions
- Number of cylinders
- Engine versions

NOTE:
- Coding adjusts the various combination possibilities of the on board computer according to engine type, cylinder count and country version.
- Only the appropriate combinations for the Audi A4 or Audi S4 are mentioned in the coding table.

Initiating coding

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer Q
07 Code control module

- Press -Q- button to confirm input.

Indicated on display

Code control module Q
Input code number XXXXX (0-32000)

- Input code number using Coding table. Example: 02242







- Code control module Q
- Input code number 02242 (0-32000)

- Press -Q- button to confirm input.

Indicated on display

8D0920830... B5-INST. Clstr. M73 D08 ->
Coding 02242 WSC 06812

- Press -> button.







NOTE: Navigation I is the first generation navigation system in center display. Navigation II is the navigation system with the monitor in the center console.







NOTE:
- Coding can be modified to allow for various combinations of optional equipment, depending on what is installed in the vehicle.
- If vehicle is equipped with more than one item of optional equipment and/or transmission variant that needs to be coded, the overall coding will be the total of the individual coding numbers.

Examples
- Seat belt warning active and navigation I 02 + 16 = 18