Left and Right-Side Trim, Removing and Installing

Left And Right-side Trim, Removing And Installing

- Remove side panel.
- Remove tailgate seal in area of loading edge/side panels.
- Remove loading edge.
- Lift front edge of cover for seat belts and unclip.
- Lift up cover for latch bracket for rear backrest.
- Remove cap.
Disassembling tie-down.







- Remove bolts (arrow).
Tightening torque: 1.5 Nm (13 in.lb)
- Unclip side trim and pull up and over belt guide and latch bracket.
- If changing completely, disassemble seat belt webbing underneath rear seat.
- Installation is the reverse of removal.