Code Control Module (Function 07)

Code Control Module (Scan Tool Function 07)

This function is used to code the radio for the following:
- Radio configuration
- Sound system
- Number of passive loudspeakers
- Country identification

NOTE:
- The coding procedure is used to set the various radio configuration options.
- The coding table only gives the combinations that are available for the Audi A4.
- The term "antenna with remote power supply" refers to active antennas (e.g. rear window antennas) which are powered via the HF cable.
- The coding must always correspond to the equipment installed in the vehicle.

Coding procedure

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- to select "Code Control Module" function 07.

Indicated on display

Rapid data transfer Q
07 - Code Control Module

- Press -Q- button to confirm input.

Indicated on display

Code Control Module Q
Input code number XXXXX 06812

- Input code number per coding table.

Coding: 00017 (example)
- Country identification: 0 = standard
- Sound coordination: 0 = standard
- Number of passive loudspeakers: 0 = no passive loudspeakers (BOSE sound system)
- Sound system: 1 = BOSE
- sound system Radio configuration: 7 = radio system with CD changer unit and secondary display

- Press -Q- button to confirm input.

Indicated on display (the control module identification and the coding that was input)

4B0035186A Radio D01 ->
Coding 00017 WSC 06812

- Press -> button to end coding.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display

Rapid data transfer Q
06 - End Output

- Press -Q- button to confirm input.

Radio coding table