Roof Molding, Removing and Installing

Roof molding, removing and installing







1 - Roof molding
Removing:
- Carefully lift off roof molding from back-to-front of vehicle.

Installing:
- Attach seal -2- to roof molding.
- Lubricate seal channel (i.e. with soap suds)
- Insert roof molding below recess cover at front windshield -3-, and press into roof recess section by section up to center of roof.
- Insert roof molding below recess cover at rear window, and press into roof recess completely.
2 - Seal
- Lubricate (i.e. with soap suds) before installing
3 - Windshield