With Manufacturer Scan Tool

Check DTC Memory (Scan Tool Function 02)

Instrument cluster


NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on by pressing PRINT button (indicator light in button comes on).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2- to select "Check DTC Memory" function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC Memory


- Press -Q- button to confirm input.

The number of stored malfunctions appears in the display.


X DTC recognized! ->


The stored malfunctions are displayed and printed out one after the other.
- Check print-out against DTC table and repair all malfunctions as necessary. Instrument Cluster/Carrier

If "No DTC recognized!" is displayed the program will return to "Select function XX" after the button is pressed.


No DTC recognized! ->


Indicated on display


Rapid data transfer HELP
Select function XX

End output (function 06).

- Switch ignition off and disconnect scan tool from Data Link Connector (DLC).