Roof Rail, Removing and Installing

Roof Rail, Removing And Installing







Removing
1 - Roof rail
- Disassemble headliner before removing
- When installing screws -2- note tightening sequence
2 - Screws
- 23 Nm (+2/-0 Nm) (17 ft lb(+18/-0) in. lb)
- Remove screws (3x) and remove roof rail -1-
3 - Seals with bonded sealing ring
- Check for correct fit when replacing

Installation sequence
- Position roof rail and tighten until seals contact evenly.
- Align roof railing towards center.
- Tighten screws in sequence: center, front, back.