5 Speed Manual Transmission 01A All Wheel Drive

Transmission Oil Level, Checking
Special tools and equipment
- 17 mm wrench insert hex socket or
- 3357 triple square socket driver

Notes:
- The oil filler plug is on the left of the transmission below the speedometer vehicle speed sensor and may be concealed by the heat shield for the drive axle.
- Depending on the version installed, use either 3357 triple square socket driver or a 17 mm to loosen the oil filler plug.
- Use 3357 triple square socket driver to loosen the oil drain plug.





- To check oil level, remove oil filler plug (arrow).
Specification: Oil level up to bottom of filler hole
- Top off transmission oil if necessary.
Specification, Refer to Manual Transaxle/Transmission, Specifications.
- Install oil filler plug.
Tightening torque: 25 Nm (18 ft. lbs.)