With Manufacturer Scan Tool

Check DTC Memory (Scan Tool Function 02)


NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2-. This selects "Check DTC memory", function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC memory


- Press -Q- button to confirm input.


The number of stored malfunctions appears in the display.


X DTC RECOGNIZED!


The stored malfunctions are displayed and printed out one after the other.
- Check print-out against DTC table and repair malfunction. Instrument Cluster/Carrier


If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.


No DTC recognized ->


Indicated on display


Rapid data transfer HELP
Select function XX


If something else is displayed:
- End Output (function 06)
- Switch off ignition and disconnect diagnostic connector.