With Manufacturer Scan Tool

Erase DTC Memory (Scan Tool Function 05)


NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked.
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5. This selects "Erase DTC memory", function 05.

Indicated on display


Rapid data transfer Q
05 erase DTC memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC memory erased!


DTC memory is erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:


CAUTION!
DTC memory was not checked

- Test sequence is faulty if this message is displayed.


Rapid data transfer ->
DTC memory was not checked


- Test sequence is faulty if this message is displayed.

Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.