Front Occupied Seat Sensor, Removing and Installing

Front Occupied Seat Sensor, Removing And Installing

Removing


CAUTION!
Note safety specifications when working on airbag.


- For vehicles with coded radio unit, radio/navigation system (RNS) note coding; ask if necessary.
- Disconnect battery ground strap/cable and cover negative pole.
- Remove front seat.
- Removing seat cover.
- Cut through cable ties.







- Remove connector -1- for occupied seat sensor and seat heater and disconnect.
2 - Connector for side airbag
- Remove seat cushion with sensor mat and seat heater.


NOTE: Sensor mat for occupied seat sensor is available as replacement part only in connection with seat heater and seat cushion.


Installing
Installation is done in reverse sequence, noting the following:


CAUTION!
Sensor mat must not be creased, otherwise mat will malfunction.


- After installation check function of sensor mat.


CAUTION!
Note instructions when installing seats.