Sunroof / Moonroof Switch: Service and Repair

Power Sun Roof Switch, Removing and Installing


NOTE: Before removing switch, the sun roof (if possible) must be either completely closed or completely open.


Removing:
- Using a flat-tip screwdriver, carefully lift off lens cover.







- Remove both screws -arrow- inside interior light housing.
- Using a flat-tip screwdriver, lift out interior light housing at front and remove from headliner.







- Disconnect connector or microphone -1-, for power roof -2- and for interior light -3-.
- Remove complete cover and pull power roof switch toward the front.
- The potentiometer can be removed from the back side.

Installing:
- Attach potentiometer and switch to interior light cover.
- Connect all electrical connectors.
- Insert complete unit into headliner and engage at opposite side.
- Install screws and reinstall lens cover.