Center Armrest, Removing and Installing

Center Armrest, Removing And Installing







1 - Armrest
- Remove cover in center console Fig. 3.
- Disconnect harness connector for lighting Fig. 4.
- Remove vent console Fig. 2.
- For vehicles with telephone installation, disconnect harness connector Fig. 1.
- Pull telephone cable under air shaft through toward front.
- Remove cover - 6 -.
- Remove bolt 7- (1x).
- Remove center armrest - 1 - with support foot.







2 - Support foot
3 - Grommet
4 - Mount
- For bracket for center armrest
5 - Center console
6 - Cover
7 - Socket-head bolt, 22 Nm







Fig. 1 Disconnecting connector for telephone
- Press buttons (arrows) and disconnect connector for telephone - 1 -.







Fig. 2 Removing vent console
- Remove trim plate - 2 -.
- Remove bolts - 3 -.
- Remove vent console - 1 -.
- Disconnect harness connector.







Fig. 3 Removing center console cover
- Pry off cover - 1 - at cut-out - 2 -.







Fig. 4 Disconnecting connector for lighting
- Pull cable out of cut-out.
- Disconnect harness connector - 1 -.
For vehicles without telephone, there are two harness connectors - 1 -.