Front

ABS Wheel Speed Sensor, Removing And Installing
- Switch off ignition.
- Raise vehicle.
- Remove wheel.
- Remove front half of wheel housing liner.





- Disconnect harness connector for wheel speed sensor wire.
- Disconnect ABS wheel speed sensor wiring from retainers.
- Pull ABS wheel speed sensor out of wheel bearing housing.

Installing
- Replace clamping sleeve (item 5)
- Before inserting ABS wheel speed sensor, install sealing cuff and coat wheel speed sensor completely using G 000 650 solid lubricant.
- Press ABS wheel speed sensor in by hand until impact.
- Connect ABS wheel speed sensor wiring and snap grommets into retainers.
- Mount wheels and tighten to 120 Nm.