Seatback Electrical Components, Removing and Installing

Seatback Electrical Components, Removing And Installing

- Seatback cover and seatback cushion, removing.







1 - Seatback adjustment sensor, drivers seat - F86 -
- Installed only in driver seat
2 - Motor for seatback adjustment, drivers seat - V45 - and motor for seatback adjustment, passenger seat - V46 -







3 - Bendable driveshaft
- For headrest adjustment
- Installed in motor for headrest adjustment
- Fastened with 2 tie wraps
4 - Headrest adjustment sensor - G129 -
- Installed only in driver seat
5 - Motor for left headrest adjustment - V103 - and motor for right headrest adjustment - V104 -







6 - End switch for headrest adjustment (downward) driver seat - E196 - and end switch for headrest adjustment (downward) passenger seat - E197 -
- Available as replacement only together with end switch (upward) - 7 -.
- Remove headrest cover - 8 - to adjust







7 - End switch for headrest adjustment (upward) driver seat - E194 - and end switch for headrest adjustment (upward) passenger seat - E195 -
- Available as replacement only together with end switch (downward) - 6 -.
- Remove headrest cover - 8 - to adjust
8 - Cover for headrest adjustment
- Removing: drill out rivets and unhook cover
- Installing: hook in cover and rivet tight







9 - Valve block for lumbar support drive side -N209- and valve block for lumbar support passenger side - N210 -
10 - Pressure switch for lumbar support, drivers side - F224 - and pressure switch for lumbar support, passenger side - F225 -
- Inserted in protective sack - 11 -
11 - Protective sack
- For pressure switch and pump for lumbar support adjuster
- Fastened with double sided tape to seatback frame
- Closed with tie wrap







12 - Pump for lumbar support driver side - V152 - and pump for lumbar support passenger side - V153 -
- Inserted in protective sack - 11 -
13 - Air pillow for lumbar support adjustment
- Fastened to underside with double sided tape