Lock For Split Rear Backrest (Sedan and Avant Up to m.y. 1998), Removing and Installing

Lock For Split Rear Backrest (Sedan And Avant Up To m.y. 1998), Removing And Installing







- Remove screws - 3 - (2x).
- Push release lever - 5 - back and remove bolt - 4 -.
- Remove lock - 6 - from rear backrest - 2 -.
- When installing lock - 6 -, release lever - 5 - has to engage in groove for release - 1 -.
- Remove rear backrest upholstery in area near lock.







- Remove screws - 3 - (2x).
- Remove release - 1 - downward out of rear backrest.