Sunshade For Door Glass, Removing and Installing

Sunshade For Door Glass, Removing And Installing

Removing
- Remove trim for rear door.







- Remove trim strip - 1 - for window channel to side.
- Remove, if necessary, retaining clip - 4 - for trim strip to separation point between sunshade and door trim.
- Remove 6 Phillips-head screws - 2 - and remove sunshade. If necessary loosen foam seal at edges.

Installing
Installation is done in reverse sequence, noting the following:
- Tighten Phillips-head screws - 2 - securely to 1.5 Nm (13 in.lb.).
- Press trim strip - 1 - for window channel onto retaining clips - 4 - (arrows).