Power Sunshade For Rear Glass, Removing and Installing

Power Sunshade For Rear Glass, Removing And Installing

NOTE: In the Fig., hatshelf shown from back side.







1 - Hat shelf
2 - 4.5 Nm (40 in.lb.)
- 4 parts
3 - Power sunshade
- Removing:
- Remove hatshelf.
- Remove adhesive strip (hatched area).
- Separate tie wrap (arrow).
- Remove nuts - 2 -.
- Remove - 5 - and remove sunshade.







4 - Rear window shade motor - V91 -
- Motors with hex head drive gear are no longer available.
- For change-over to star shape drive gear use small part set
- See parts catalog
- Change drive disc.
5 - 5.5 Nm (49 in.lb.)
- 2 parts
6 - Rear window shade control module - J262 -