Erasing DTC Memory (Function 05)

NOTE: DTC memory can be erased only after it has been checked. If DTC memory cannot be erased, again check DTC memory and repair any malfunctions.

Requirements
- DTC memory checked.
- All malfunctions repaired

- When DTC memory has been checked:

Indicated on display
Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display
Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display
Rapid data transfer ->
DTC Memory is erased!

- DTC memory is now erased.
- Press -> button.

Indicated on display
Rapid data transfer HELP
Select function XX

NOTE: This message indicates an error in the test sequence.

Attention! ->
DTC Memory is not interrogated

- This message indicates an error in the test sequence.

Rapid data transfer ->
DTC Memory is not interrogated

- Adhere exactly to the test sequence: first check DTC memory repair malfunctions as necessary then erase DTC memory