Rear Center Console, Removing and Installing

Rear center console, removing and installing

CAUTION! Before disconnecting the battery, determine the correct coding for the anti-theft radio.




- Disconnect battery Ground (GND) strap.
- Remove ashtray.
- Remove hex- bolts: 5 Nm (44 in. lb)
- Unclip trim plate.
- Remove bolt: 5 Nm (44 in. lb)
- Pull center console upward out of locking lugs.
- Disconnect harness connectors.
- Remove center console forward over parking brake lever.
- Install in reverse order of removal.