Water Pump: Service and Repair

LEGEND
1 Thermostat
2 Seal
3 Thermostat Housing
4 Bolt
5 Gasket
6 Water Pump
7 Bolt

NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.

COMPONENT NOTES
Seal (2)
- Always replace.

Bolt (4)
- Tighten to: 10 Nm (7 ft. lbs.).

Gasket (5)
- Always replace.

Bolt (7)
- Tighten to: 10 Nm (7 ft. lbs.).

Water Pump (6)
- Replacement requires removal of accessory drive belt and timing belt. Please see appropriate sections for these procedures.