CD Changer: Service and Repair

Removing

- Remove screws -1- from cover.





- Unhook fastening band -2-.
- Remove cover from CD changer.
- Remove nuts -4-.





- Remove bracket -7- along with CD changer -2- from threaded studs and move assembly to the side.
- Disconnect CD changer connector -1- and vehicle wiring harness connector from interface -6-.
- Remove CD changer and bracket from vehicle.
- Remove screws -5- and remove CD changer -2- from bracket.
- Remove screws -3- and remove interface -6- from bracket -7-.

Installing
Install in reverse order of removal, noting the following:
- Ensure housing of interface -6- does not contact vehicle Ground (GND).