Guide Plate With Cable, Removing and Installing
Guide plate with cable, removing and installingRemoving
- Remove sunroof motor.
- Slide guide plate toward rear in guide rail evenly on both sides.
- Remove screws from guide channel.
Tightening torque: 2.0 Nm (18 in lb)
- Remove guide channel.
- Slide guide plate forward out of guide rail.
- Flip up water channel -1- in guide plate -2- and pull out in direction of arrow.
Installing
Note: Install water channel before installing guide plates.
- Fit water channel into frame in direction of arrow and slide toward rear.
- Install all other components.